Features of PIONEER GM 2-Channel 500W Bridgeable Amplifier GM-A3702
- 500 Watts Max Power
- Automatic signal sensing and Turn-ON
- Hi-Volt input level control
- Balanced isolator input circuit
Product Info for PIONEER GM 2-Channel 500W Bridgeable Amplifier GM-A3702
From dramatic distinction to dramatic design, Pioneer's GM Series 2-Channel Class A/B Bridgeable Amplifier is thrillers in every sense, pushing the limits of flexibility and functionality.
The Pioneer amplifier brilliantly integrates high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.
The amplifier automatically selects the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.
When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifier automatically detects the input signal and select RCA level or speaker level.
GritrOutdoors is an authorized Pioneer dealer
|Avg Current Consumption (amps x #ch)||4 Ohm - 6.5A (1Ch) / 4 Ohm - 4A (2Ch)|
|Crossover Network Channel Slope||-12db/oct (A Ch)|
|Fuse Rating||25 A|
|Load Impedence Allowance||2 Ohm to 8 Ohm allowable|
|Nominal Power Output||2 Ohm - 95W x 2 / 4 Ohm - 50W x 2 / 4 Ohm Bridged - 190W x 1|
|Signal to Noise||78 dBA (Reference: 1 W into 4 Ohm)|
|Crossover Network Channel||LPF - A Ch 80Hz|
|Frequency Response Channel||10Hz to 70kHz (+0dB, -3dB) A Ch|
|Input Level @ Gain Max||0.3 V to 6.5 V - RCA / 3.0 V to 26 V - Speaker|
|Max Power Output||2 Ohm - 250W x 2 / 4 Ohm - 170W x 2 / 4 Ohm Bridged - 500W|
|Protection Control System||Yes|
|Power Source||14.4 V (10.8 V to 15.1 V allowable)|
|Unit Weight||3.1 lbs|
|In Box||2-Channel amplifier
25A ATO fuse (installed)
Speaker input harness with four 4" wires
4 Self-tapping screws (3/4" length)