ACCUSHOT Atlas Bipod No Clamp (BT10NC)

Features of Accushot Atlas Bipod No Clamp BT10NC

• Construction from T6061 Aluminum, Hard Anodized black; Stainless steel springs and fasteners
• Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mount
• Non orientated leg positioning use either hand to move leg into any of the four leg positions
• Leg positions are stowed back, 90 degrees straight down, 45 degrees forward and stowed forward
• All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions
• Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions 3/4" apart and can be done by either hand
• Standard soft durable Rubber feet that are suitable for many surfaces
• Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip
• Estimated range of elevation on the BT10 is 5-9" from the surface up to the rail
• No Clamp

Product Info for Accushot Atlas Bipod No Clamp BT10NC

The BT10-NC V8 Atlas Bipod "No Clamp" model requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance or LT271. The BT10-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.

More Info

• Manufactured from T6061 Anodized Aircraft grade Aluminum; Stainless steel springs and fasteners
• Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mount
• Non orientated leg positioning use either hand to move leg into any of the four leg positions
• Leg positions are stowed back, 90 degrees straight down, 45 degrees forward and stowed forward
• All 5 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions
• Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions 3/4" apart and can be done by either hand
• Standard soft durable Rubber feet suitable for most surfaces
• Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip
• Estimated range of elevation on the BT10 is 5-9" from the surface up to the rail
• No Clamp

GritrOutdoors is an authorized Accushot dealer