COUNCIL TOOL Dayton Single 36in Curved Handle 3.5lb Bit Axe (35DR36C)

Features of COUNCIL TOOL Dayton Single 36in Handle Bit Axe 35DR36C

• 3.5 lb. Dayton pattern single bit axe with 36" curved wooden handle
• Hand sharpened, tapered bit for cutting and splitting
• Head coated with red enamel and cutting edges in clear lacquer to deter rust
• 36" curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening
• Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge
• The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content
• The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2" of the overall length of the handle is removed during assembly
• ANSI Standards call for bit hardness of Rc 45-60, at least 1/2 inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and Council Tool's target 1-1/4 inches from the cutting edge
• A full-sized felling axe for general axe chores. Cutting edge is approximately 4.75" of overall length and the poll is square
• Forged tool steel head. Made in USA

Product Info for COUNCIL TOOL Dayton Single 36in Handle Bit Axe 35DR36C

The COUNCIL TOOL Dayton Single 36in Curved Handle 3.5lb Bit Axe (35DR36C) is a full-sized felling axe for general axe chores. Cutting edge is approximately 4.75 in. of overall length and the poll is square.

GritrOutdoors is an authorized Council Tool dealer