FIX IT STICKS All-in-One Multi-Torque Driver / Driver Kit

Product Info for FIX IT STICKS All-in-One Multi-Torque Driver / Driver Kit

Stripped screws and cracked scope rings have one thing in common. Both usually come from guessing at torque. The Fix It Sticks All-in-One Torque Driver takes the guesswork out of the equation. It's a simple, accurate tool that protects your gear whether you're at home, at the range, or in the field.

The driver is available in two sizes. The Mini covers 6 to 25 inch-pounds, which handles most red dot sights, mounting plates, and lighter optic hardware. 

The Full Size runs from 15 to 65 inch-pounds for heavier applications like scope rings and rail mounts. Both deliver plus or minus 10 percent accuracy, which is tight enough for firearm work without requiring a dedicated torque wrench.

Setting your torque value takes seconds. Simply turn the drive handle until the hash mark lines up with your target value on the collar. Tighten until the marks align, then release the pressure, and the driver resets to zero automatically. There's no collar adjustment needed and no factory calibration required before use. It arrives ready to work.

The driver accepts any standard quarter-inch bit and fits any standard quarter-inch drive handle. That means it works with bits you likely already own. It also integrates with the Fix It Sticks Replaceable Edition and T-Way Driver for shooters already running that system. The compact, pocket-size form factor makes it easy to drop into a range bag or pack without adding bulk.

Features

• Available in Mini (6-25 in-lbs) and Full Size (15-65 in-lbs)
• Adjustable torque value with hash mark alignment system
• Plus or minus 10% accuracy
• Accepts any standard 1/4" bit
• Fits any standard 1/4" drive handle
• Auto-resets to zero after each use
• Factory calibrated, no adjustment needed before use
• Compatible with Fix It Sticks Replaceable Edition and T-Way Driver
• Pocket-sized and field-ready
• Suitable for scope rings, red dots, mounting plates, and more

Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Driver (not included).

All-in-one Torque Driver Instructions

Before use, confirm tool is at the "0" setting. The tool is factory calibrated and requires no adjustment before use. Do not attempt to adjust the collar - it is fixed in position by design.

1. Insert the All-in-one Torque Driver into any 1/4" drive handle.

2. Insert the appropriate bit for the fastener to be used.

3. Turning the drive handle clockwise, carefully tighten the fastener until the target torque mark on the collar aligns with the fixed mark on the end of the tool. Gently release pressure, and the torque driver will return to the "0" setting.

Note: Failure to follow these instructions may affect accuracy and/or damage the tool. Always follow manufacturer torque specifications to avoid damage to firearms and accessories

 Read a professional review  in our blog

GritrOutdoors is an authorized Fix It Sticks dealer

Frequently Asked Questions

What's the difference between the Mini and Full Size versions? 

The Mini handles 6 to 25 inch-pounds, which covers most pistol optics, red dot sights, and lighter mounting hardware. The Full Size handles 15 to 65 inch-pounds for heavier applications like scope rings and rail systems. If you're mounting a magnified riflescope, the Full Size is the right call. For handgun optics and lighter work, the Mini is sufficient.

Do I need to calibrate it before use? 

No. The tool ships factory-calibrated and is ready to use out of the box. Do not attempt to adjust the collar. It is fixed in position by design, and moving it will affect accuracy.

What bits does it accept? 

It accepts any standard quarter-inch hex bit. You're not locked into a proprietary system, so bits you already own for other drivers will work here. Fix It Sticks also sells bit sets separately if you need specific sizes for firearm fasteners.

Can I use this with other Fix It Sticks tools? 

Yes. The All-in-One Torque Driver integrates with the Fix It Sticks Replaceable Edition and T-Way Driver, though those are sold separately. If you're building out a full field maintenance kit, the Fix It Sticks ecosystem is worth considering.