REDDING Competition 308 Winchester Neck Die (56155)

Features of REDDING Competition 308 Winchester Neck Die 56155

• Similar design concept to Redding's Competition Seating Die
• Cartridge case completely supported and aligned with sizing bushing before sizing
• Cartridge case remains supported in tightly chambered sliding sleeve while moving upward
• Resizing bushing self-centers on case neck
• Decapping rod maintained in precise alignment using internal parts as liner support like a firing pin
• Micrometer adjustment of bushing position provides precise control of neck length sizing
• Designed for competition shooters with meticulously prepared cartridge cases
• Carbide size button kits available separately
• Proper bushing diameter determined by measuring neck diameter and subtracting .001-.002 inches
• Alternative sizing method using ball micrometer or Redding's Case Neck Gauge, doubling wall thickness and adding bullet diameter

Product Info for REDDING Competition 308 Winchester Neck Die 56155

Competition Bushing Neck Sizing Die - Similar in design concept to Redding's Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moved upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a liner support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. The die was designed for use by Competition Shooters who have meticulously prepared their cartridge cases and do not wish to use a sizing button, however, carbide size button kits are available separately.

How to Determine Which Bushings You Need:

The easiest way to determine the proper diameter bushing, is to measure the neck diameter of several loaded or dummy cartridges with an accurate micrometer. Subtract .001"- .002" from the average neck diameter and this diameter bushing will generally size case necks to create the proper press fit for the bullet.

Another method is to measure the neck thickness with a ball micrometer or Redding's Case Neck Gauge. Double the wall thickness and add this number to the bullet diameter. The result is the neck diameter of a loaded cartridge, and bushing size can be determined as above.

GritrOutdoors is an authorized Redding dealer