VORTEX Optics SPARC AR Red Dot 2 MOA Sight (SPC-AR2)

Features of VORTEX Optics SPARC AR Red Dot 2 MOA Sight SPC-AR2

• Fully Multi-Coated
• Unlimited Eye Relief - Non-critical eye relief for rapid target acquisition
• Parallax Free
• Night-Vision Compatibility - The lowest 2 settings are night-vision compatible
• Single-Piece Chassis - Compact and lightweight
• Waterproof - O-ring seals prevent moisture, dust and debris from penetrating
• Shockproof - Rugged construction withstands recoil and impact
• 2 MOA Dot Reticle
• Included: T-10 Torx wrench, AAA battery, Rubber cover with flip caps, Absolute co-witness mount, Lower 1/3 co-witness mount
• Matte Anodized Finish

Product Info for VORTEX Optics SPARC AR Red Dot 2 MOA Sight SPC-AR2

Ready to handle any environment, the SPARC features tough construction with a compact and lightweight form-factor. The 2 MOA dot is as easy as point and shoot - it’s quick to acquire in close-quarters scenarios, but fine enough to promote pin-point accuracy at extended ranges. A unique, integrated base is hassle-free for some platforms. For excellent, reliable performance and loads of user-friendly features, look no further than the SPARC.

Daylight Bright Red Dot Reticle

The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings - the lowest two settings are night-vision compatible. The key thing to remember when shooting with the SPARC Red Dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical.

Mounting the SPARC Red Dot

The SPARC Red Dot can be mounted at two heights, lower 1/3 co-witness and absolute co-witness. To mount it at lower 1/3, mount the sight as received. The optic center will be 40mm above the base surface. To mount for absolute co-witness you can remove the 3mm base shim. The optic center at absolute co-witness will be 37mm above the base surface. To change the mount height, loosen and remove the four base screws and remove the base clamp along with the 3mm shim. Reinstall the base clamp with the four shorter screws supplied with your Red Dot.

GritrOutdoors is an authorized Vortex dealer