Description
Features of EGW Trijicon RMR Sight Mount for Springfield XD 49523
- Designed for easy red-dot sight mounting
- Compatible with Trijicon RMR red-dot sight
- Allows for rear sight replacement and reinstallation
- Includes mounting hardware and screws
- Requires a 5/64" Allen wrench for installation
- Torque mounting screws to 15 in/lbs
- Blue Loctite recommended for mounting
Product Info for EGW Trijicon RMR Sight Mount for Springfield XD 49523
Simply remove the rear sight on your gun and replace it with the Evolution Gun Works Trijicon RMR Sight Mount in order to mount your Trijicon RMR red-dot sight. You can take these Evolution Gun Works Red Dot Sight Mounts off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions: Remove the rear sight. Install the EGW Sight Mount in the dovetail. Tighten set screw (if applicable). Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight). Apply blue Loctite to the provided mounting screws. Torque mounting screws to 15in/lbs.
The screws that are included with this mount require a 5/64in allen wrench for installation.
GritrOutdoors is an authorized Evolution Gun Works dealer
Details
Color: |
Black |
Finish: |
Hardcoat |
Length: |
1.78in |
Activity: |
Shooting |
Firearm Fit: |
Springfield XD |
Product Type: |
Scope Mounts |
Specification
| This mount fits | Springfield XD MOD.2 - 3" SUB-COMPACT MODEL Springfield XD MOD.2 - 3.3" SUB-COMPACT MODEL Springfield XD MOD.2 - 4" SERVICE MODEL Springfield XD MOD.2 - 4" SERVICE MODEL THREADED BARREL Springfield XD MOD.2 - 5" TACTICAL MODEL Springfield XD 3" SUB-COMPACT MODEL Springfield XD 4" SERVICE MODEL Springfield XD(M) 3.8" COMPACT MODEL Springfield XD(M) 3.8" MODEL Springfield XD(M) 4.5" MODEL Springfield XD(M) 4.5" THREADED BARREL MODEL Springfield XD-S 3.3" MODEL Springfield XD-E 3.3" SINGLE STACK Springfield Hellcat (NON OSP - NOT OPTIC READY) |
| Does not fit | Springfield XD(M) 5.25" COMPETITION SERIES MODEL Any Optics Ready Springfield XD |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Mounting Hardware | (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw |
| Red Dot Fitment | Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice |
