Description
Features of EVOLUTION GUN WORKS Vortex Sight Mount 49295
- 7075 Aluminum Construction
- Matte Black Hardcoat
- (2) 6-32 Button Head Screws
- (2) 6-32 Flat Head Screws
Product Info for EVOLUTION GUN WORKS Vortex Sight Mount 49295
The EVOLUTION GUN WORKS Vortex Viper/Venom Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. The red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the EGW's mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
GritrOutdoors is an authorized Evolution Gun Works dealer
Details
Color: |
Black |
Finish: |
Matte |
Activity: |
Shooting |
Base Fit: |
Dovetail |
Firearm Fit: |
Walther PPQ M2 |
Product Type: |
Scope Mounts |
Specification
Fitment | Walther PPQ Classic (M1) Walther PPQ M2 (All models except optics ready and .22lr) Walther PPQ 45 Walther PPQ 45 SD Walther PPQ Sub Compact Walther P99 (All Models) Walther PPX (All Models) Walther Creed Walther Creed 10 Round Walther PPS (All Models) Walther PPS M2 (All Models) This mount does not fit: Walther PPQ 22 Walther PPQ Q4 Tac (optics ready) Walther Q5 Match (optics ready) Walther Q5 Match SF Arabesque Walther Q5 Match SF Patriot Walther Q5 Match SF Black Diamond Walther Q5 Match SF Match Black Tie Walther P2 |
Material | 7075 Aluminum |
Coating | Matte Black Hardcoat |
Overall Length, in | 1.811" |
Overall Width, in | .99" |
Torque Specs | 15 in/lbs |
Mounting Hardware | (2) 6-32 Button Head Screws (2) 6-32 Flat Head Screws |
Red Dot Fitment | Viridian RFX25 Vortex Viper Vortex Venom Burris FastFire Burris FastFire 2 Burris FastFire 3 Burris FastFire 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot |