EVOLUTION GUN WORKS Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ 75, 75 SP-01 Phantom, 85, 97, P01, and PCR (49526)

Features of EVOLUTION GUN WORKS Trijicon RMR / SRO Holosun 407c / 507c Mount for CZ 75 75 SP-01 Phantom 85 97 P01, and PCR 49526

• 7075 Aluminum
• Includes (2) 6-32 Flat Head Screws and (1) 6-32 X 3/16 Set Screw

Product Info for EVOLUTION GUN WORKS Trijicon RMR / SRO Holosun 407c / 507c Mount for CZ 75 75 SP-01 Phantom 85 97 P01, and PCR 49526

This mounts fits:

• CZ 75
• CZ 75B
• CZ 75 SP-01
• CZ 75 SP-01 Phantom
• CZ 75 SP-01 Shadow*
• CZ 85
• CZ 97B
• CZ 97D
• CZ P-01
• CZ PCR (there will be a gap under the front of the adapter plate)
• Tristar P120

This mount does not fit:

• CZ P-07
• CZ P-09

*EGW have found that their mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", the mount will not be a drop in part for your application.

Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.

Installation Instructions
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs

GritrOutdoors is an authorized Evolution Gun Works dealer