EVOLUTION GUN WORKS Remington 700,722 40x Short Action Picatinny Scope Base 20 MOA (40002)

Features of EGW Remington 700-722 40x Scope Base 40002

• One Piece Picatinny Rail
• Machined from Domestic 6061 T6 Extruded Aluminum
• Fits Remington 700/722/40X Short Action, Remington 700 Ultimate Muzzleloader, Bergara B14 (#6 Screws), Christensen Arms Short Action, CVA Paramount, CVA Paramount Pro
• Matte Black Anodizing Finish
• Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
• Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories
• The channel in the center reduces the overall mass of the mount
• Comes with a bevel on both sides that making it ambidextrous

Product Info for EGW Remington 700-722 40x Scope Base 40002

The Bergara Premier, and certain Remington 700 models (ie. 700 Police, 700 LTR) require the base to be drilled out for #8 screws. Our Remington 700 mounts that are predrilled are only available in our Heavy Duty platform and are available below. If you would like to drill the mount yourself, we do offer a #8 Drill Out Kit which comes with the appropriate drill bit and screws.

This mount comes standard with a bevel on both sides making it ambidextrous.

The bolt pattern on our Remington 700 Short Action mount fits Short Action Remington 700 rifles (example 223, 308), as well as the 722 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.

We recommend measuring the hole spacing in your receiver to confirm it matches the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct the usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long-lasting durability.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

GritrOutdoors is an authorized Evolution Gun Works dealer