Open Box (Damaged package): FIX IT STICKS All-in-One Torque Driver (FIS-VTD_2)

Fix It Sticks All-in-One Torque Driver

Tighten down your scope rings, red dot sights, mounting plates, etc. while in the field, at the range, or at home.  No more over or under tightening your critical components. 

Just turn the drive handle until the hash mark lines up with the torque value you need.

Features

• Accepts any standard 1/4" bit
• Fits into any standard 1/4" driver
• +/- 10% Accuracy

Integrates perfectly with Fix It Sticks Replaceable Edition and T-Way Driver (not included).

All-in-one Torque Driver Instructions

Before use, confirm tool is at the "0" setting. The tool is factory calibrated and requires no adjustment before use. Do not attempt to adjust the collar - it is fixed in position by design.

1. Insert the All-in-one Torque Driver into any 1/4" drive handle.

2. Insert the appropriate bit for the fastener to be used.

3. Turning the drive handle clockwise, carefully tighten the fastener until the target torque mark on the collar aligns with the fixed mark on the end of the tool. Gently release pressure, and the torque driver will return to the "0" setting.

Note: Failure to follow these instructions may affect accuracy and/or damage the tool. Always follow manufacturer torque specifications to avoid damage to firearms and accessories